SKYPE: HTAUTOMATIC, WHATSAPP: 008613452987773
WECHAT: HT-13452987773, EMAIL: htautomation@genspare.com
Position:Home > Products > Generator Controller > Smartgen- original

Smartgen Genset Generator Controller HGM180HC

 

introduction

Original Smartgen HGM180HC Generator Controller

Smartgen Genset Generator Controller HGM180HC

 

Original Smartgen HGM180HC Generator Controller

HGM180HC User Manual.PDF

 

Smartgen HGM180HC auto start module is an engine control module designed to control the engine via pushbuttons on the front panel or remote start signal. The module has 3 working modes to choose. When detecting faults, such as low oil pressure, high water/cylinder temperature, auxiliary alarm, over speed, it will disconnect fuel relay and energize to stop. LED annunciator displays the faults, which can offer real and effective alarm information.

Product Code6010081

Power SupplyDC(8-35)V

Case Dimensions84*72*35(mm)

Panel Cutout78*66(mm)

Operating Temp. (-30~+70)

Weight0.2kg

 

CHARACTERISTICS for HGM180HC Smartgen Genset Controller:

 

Working Voltage

DC8.0V to 35.0V continuous

Power Consumption

Standby (12V: 0.12W, 24V: 0.24W)   Working (12V: 0.5W, 24V: 1W)

Alternator Voltage Input

15VAC - 360VAC (ph-N)

Alternator Rated Freq.

50/60Hz

Over Speed Freq.

114% of rated freq.

Condition of Crank Disconnect

Generator voltage ≥15VAC and   frequency ≥15Hz

Charge Failure Voltage

<3V

4 Digital Inputs

Connect to B- active

Start Output

1Amp DC28V relay output B+

Preheat Output

1Amp DC28V relay output B+

Fuel Output

1Amp DC28V relay output B+

Stop Output

1Amp DC28V relay output B+

Programmable Output

1Amp DC28V relay output B+

Hours Counter

Max 99999.9 hours

Case Dimensions

84mm x72mm x 35mm

Panel Cutout

78mm x 66mm

Working Condition

Temperature: (-30~+70)ºC Humidity:   (20~90)%

Storage Condition

Temperature: (-40~+80)ºC

Protection Level

IP55: when waterproof rubber gasket   added between controller and its panel. IP42: when waterproof rubber gasket   not added between controller and its panel.

Insulation Intensity

Object: among input/output/power   Quote standard: IEC688-1992 Test way: AC1.5kV/1m 3mA leakage current

Weight

0.2kg


HT Industrial Automation Limited
(Chongqing HT Electronic Tech. Limited)
Tel: 0086-023-85551980
Fax: 0086-023-85551980
Mobile: 0086-13452987773
Skype: htautomatic
WhatsApp: 0086-13452987773
WeChat: HT-13452987773
Email: htautomation@foxmail.com
Website: www.genspare.com
Address: No.18,BinJiang Road,
JiangJin District,Chongqing,China

Quick Links

Deep Sea DSE7320 DSE 7320 AMF Auto Generator Genset Controller
Deep Sea DSE7320 DSE 7320 AMF Auto Genera
AMF-25 Replace ComAp InteliLite NT IL-NT AMF25 Genset Controller
AMF-25 Replace ComAp InteliLite NT IL-NT
GAC Engine Speed Controller Control Unit ESD5500E
GAC Engine Speed Controller Control Unit
Stamford Generator AVR SX460 Voltage Regulator
Stamford Generator AVR SX460 Voltage Regu
VDO 0-10 Bar 1/8'' Genset Generator Oil Pressure Sensor
VDO 0-10 Bar 1/8'' Genset Generat
VDO Engine Genset Generator Oil Pressure Gauge
VDO Engine Genset Generator Oil Pressure
GAC Magnetic Pickup Speed Sensor MPU MSP6729
GAC Magnetic Pickup Speed Sensor MPU MSP6
GAC Generator Electric Actuator ADC225 ADC225-24 ADC225S-24
GAC Generator Electric Actuator ADC225 AD

Telephone : 0086-13452987773  FAX : +86-023-61089945
Copyright©2012 HT INDUSTRIAL AUTOMATION LIMITED. All rights reserved. Website : www.genspare.com