Smartgen Genset Generator Controller HGM1790N
introduction
Original Smartgen HGM1790N Genset Controller
Smartgen Genset Generator Controller HGM1790N
Original Smartgen HGM1790N Genset Controller
Smartgen HGM1790N genset controller is suit for single unit automation and monitoring control (also can be used for pimping unit).
Product Code：6010069
Power Supply：DC(8-35)V
Case Dimensions：95*86*46.5(mm)
Panel Cutout：78*66(mm)
Operating Temp. ：(-25~+70)℃
Weight：0.18kg
CHARACTERISTICS for HGM1790N Smartgen Controller:
Working Voltage | DC8. 0V to 35. 0V, Continuous Power Supply |
Power Consumption | <1.2W (Standby mode: ≤0.5W) |
Alternator voltage Input | AC 15V ~ AC 360 V (ph-N) |
Alternator Frequency | 50/60Hz |
Speed Sensor Voltage | 1.0V to 24V (RMS) |
Speed Sensor Frequency | Max. 10KHz |
Start Relay Output | 1Amp DC28V DC B+ power supply |
Fuel Relay Output | 1Amp DC28V DC B+ power supply |
Aux. Output1 | 1Amp DC28V DC B+ power supply |
Aux. Output2 | 1Amp DC28V DC B+ power supply |
Aux. Output3 | 1Amp DC28V DC B+ power supply |
Programmable Digital Input | Active when connected to B- |
Case Dimensions | 95mm x 86mm x 46.5mm |
Panel Cutout | 78mm x 66mm |
CT Secondary Current | Rated: 5A |
Working conditions | Temperature: (-25~+70)ºC Humidity: (20~93)%RH |
Storage Condition | Temperature: (-25~+70)ºC |
Protection Level | IP55: When waterproof rubber gasket installed between the controller and panel fascia. |
Insulation Intensity | Attach AC2.2kV voltage between AC high voltage terminal and low voltage terminal (leak current below 3mA in 1 minute). |
Weight | 0.18kg |
(Chongqing HT Electronic Tech. Limited)
Tel: 0086-023-85551980
Fax: 0086-023-85551980
Mobile: 0086-13452987773
Skype: htautomatic
WhatsApp: 0086-13452987773
WeChat: HT-13452987773
Email: htautomation@foxmail.com
Website: www.genspare.com
Address: No.18,BinJiang Road,
JiangJin District,Chongqing,China
