Smartgen Genset Generator Controller HGM6120U
introduction
Original Smartgen HGM6120U Genset Controller
Smartgen Genset Generator Controller HGM6120U
Original Smartgen HGM6120U Genset Controller
Smartgen HGM6110U_6120U_6110UC_6120UC Manual.pdf
Smartgen HGM6120U generator controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and three “remote” (remote control, remote measure and remote communication). The controller uses LCD display, optional display interface including Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French with easy and reliable operation.
Power Supply：DC(8-35)V
Case Dimensions：209 x 166 x 45(mm)
Panel Cutout：186 x 141(mm)
Operating Temp. ：(-25~70)℃
Weight：0.56kg
HGM6000 controller has six variants:
HGM6110N / HGM6110NC / HGM6110CAN: Automatic Start Module, it controls generator to start/stop by remote start signal;
HGM6120N / HGM6120NC / HGM6120CAN: Based on HGM6110N/6110NC/6110CAN, it adds mains AC monitoring and mains/generator automatic switching control (AMF), especially suitable for the automation system composed by mains and genset.
Note1: HGM6110NC/6120NC has RS485 port, HGM6110N/6120N without. HGM6110CAN/6120CAN has CAN port, HGM6110N/6120N and HGM6110NC/6120NC without.
Note2: HGM6110/6120 is taken as an example to describe in this manual.
CHARACTERISTICS for HGM6120U Smartgen Controller:
Working Voltage | DC8.0V to DC35.0V, continuous |
Power Consumption | <3W(Standby mode: ≤2W) |
AC System 3P4W 3P3W 1P2W 2P3W | AC15V - AC360 V (ph-N) AC30V - AC620 V (ph-ph) AC15V - AC360 V (ph-N) AC15V - AC360 V (ph-N) |
AC Alternator Frequency | 50Hz/60Hz |
Rotate speed sensor Voltage | 1.0V to 24V (RMS) |
Rotate speed sensor Frequency | 10,000 Hz (max.) |
Start Relay Output | 16 A DC28V at supply voltage |
Fuel Relay Output | 16 A DC28V at supply voltage |
Auxiliary Relay Output 1 | 7 A DC28V at supply voltage |
Auxiliary Relay Output 2 | 7 A AC250V volt-free output |
Auxiliary Relay Output 3 | 16 A AC250V volt-free output |
Auxiliary Relay Output 4 | 16 A AC250V volt-free output |
Overall Dimensions | 209mm x 166mm x 45mm |
Panel Cutout | 186mm x 141mm |
C.T. Secondary Current | 5A (rated) |
Working Condition | Temperature: (-25~70)ºC; Relative Humidity: (20~93)%RH |
Storage Condition | Temperature: (-30~+80)ºC |
Protection Level | IP65: when water-proof gasket installed between control panel and enclosure. |
Insulation Intensity | Apply AC2.2kV voltage between high voltage terminal and low voltage terminal. The leakage current is not more than 3mA within 1min. |
Weight | 0.56kg |
(Chongqing HT Electronic Tech. Limited)
Tel: 0086-023-85551980
Fax: 0086-023-85551980
Mobile: 0086-13452987773
Skype: htautomatic
WhatsApp: 0086-13452987773
WeChat: HT-13452987773
Email: htautomation@foxmail.com
Website: www.genspare.com
Address: No.18,BinJiang Road,
JiangJin District,Chongqing,China
