Smartgen Generator Genset Controller HGM7210
introduction
Original Smartgen HGM7210 Genset Controller
Smartgen Generator Genset Controller HGM7210
Original Smartgen HGM7210 Genset Controller
HGM7200_HGM7100A User Manual.pdf
Smartgen HGM7210 genset controllers are used for genset automation and monitor control system of single unit to achieve automatic start/stop, data measure, alarm protection and “three remote” (remote control, remote measuring and remote communication). The controller adopts large liquid crystal display (LCD) and selectable Chinese, English or other languages interface with easy and reliable operation.
Power Supply：DC(8-35)V
Case Dimensions：197*152*47(mm)
Panel Cutout：186*141(mm)
Operating Temp. ：(-25~+70)℃
Weight：0.75kg
CHARACTERISTICS for HGM7210 Smartgen Controller:
Operating Voltage | DC8.0V to 35.0V, Continuous Power Supply. |
Power Consumption | <3W (standby ≤2W) |
Alternator Input Range 3-Phase 4-Wire 3-Phase 3-Wire Single-Phase 2-Wire 2-Phase 3-Wire | 15VAC - 360VAC (ph-N) 30VAC - 620VAC (ph-ph) 15VAC - 360VAC (ph-N) 15VAC - 360VAC (ph-N) |
Alternator Frequency | 50/60Hz |
Speed sensor voltage | 1.0V to 24.0V (RMS) |
Speed sensor Frequency | 10,000 Hz (max.) |
Start Relay Output | 16 Amp DC28V at supply output |
Fuel Relay Output | 16 Amp DC28V at supply output |
Auxiliary Relay Output (1) | 7 Amp DC28V at supply output |
Auxiliary Relay Output (2) | 7 Amp 250VAC voltage free output |
Auxiliary Relay Output (3) | 16 Amp 250VAC voltage free output |
Auxiliary Relay Output (4) | 16 Amp 250VAC voltage free output |
Auxiliary Relay Output (5) | 7 Amp DC28V at supply output (HGM72X0 only) |
Auxiliary Relay Output (6) | 7 Amp DC28V at supply output(HGM72X0 only) |
Case Dimension | 197mm x152mm x47mm |
Panel Cutout | 186mm x141mm |
C.T. Secondary | 5A rated |
Working Conditions | Temperature: (-25~+70)°C; Humidity: (20~90)%RH |
Storage Condition | Temperature: (-30~+80)°C |
Protection Level | IP55: when waterproof rubber seal installed between the controller and panel fascia. IP42: when waterproof rubber seal is not installed between the controller and panel fascia. |
Insulation Intensity | Object: among in input/output/power Quote standard: IEC688-1992 Test way: AC1.5kV/1min leakage current: 3mA |
Net Weight | 0.75kg |
(Chongqing HT Electronic Tech. Limited)
Tel: 0086-023-85551980
Fax: 0086-023-85551980
Mobile: 0086-13452987773
Skype: htautomatic
WhatsApp: 0086-13452987773
WeChat: HT-13452987773
Email: htautomation@foxmail.com
Website: www.genspare.com
Address: No.18,BinJiang Road,
JiangJin District,Chongqing,China
